Contacts

Tel:86-760-23800861

Mobile/Wechat/WhatsApp:

+86-135 49930 357

Contact:Jacky Tam

  • Aerosol Paints With The Trend Of Mutual Aggregation

    Nov 02, 2017
    The preparation process of the Aerosol Paints is mainly physical dispersion and mixing process, including ingredients, pre-dispersion, grinding dispersion, reconcile, color (color) and filter packaging, in which the pigment dispersion is the key to the preparation of paint, pigment dispersion Directly affect the quality of paint and production efficiency.
  • Tire Care And Wash Usually Work When The Attention Should Also Be

    Nov 02, 2017
    Midsummer comes, the temperature is increasing. This season is also tough for the car. Because the car itself in the work of the need to disperse a lot of heat, coupled with the outside world of high temperature, will make the car many rubber parts intensified aging, which in particular the tire need special care.
  • Tire Puncture Repairs To Be Checked Regularly

    Nov 02, 2017
    Tire is the most direct contact with the ground is the largest wear and tear parts, the general replacement cycle of 30,000 - 400 km, then the choice of Tire Puncture Repairs for the above alphanumeric characters, you know what is the meaning of it?
  • Tire Care And Wash Conservation Should Not Be Overlooked

    Oct 24, 2017
    As is known to all, the only part of the car contact with the ground, the car driving four feet, the importance of Tire Care and Wash Care and Washs self-evident. Tire Care and Wash Care and Washs need very careful maintenance and care,
  • Car Care Products More Slippery, Stronger, More Durable Super Protective Layer

    Oct 24, 2017
    General knowledge of Car Care Products 1, can not use detergent, wash clean the car Because of its alkaline content, long-term use can make paint lost luster, matte color, chapped, Rusty. Special Crystal Cleanser or car wash liquid should be used
  • Radiator And Cooling Systerm Protectant Anti-rust, Antifreeze, Cleaning Function

    Oct 24, 2017
    With the development of automobile manufacturing technology and production technology, the precision of automobile parts is more and more high, the performance of automobile is more superior, the stability is more and more high, the traditional automobile maintenance can't meet the requirement of the current automobile. Coupled with environmental pollution, bad car habits, congested urban traffic and so on will make the car some stealth failure. These failures can not be effectively solved by routine maintenance. These neglected hidden faults, if not dealt with in time, will affect the service life of the vehicle.
  • Emergency Tire Inflator The Design Principle Is Quite Simple

    Oct 10, 2017
    As we all know, when the car tires are inflated with air pump, a few seconds to complete. The pump is also called inflatable machine, air blower, car inflatable pump,Emergency Tire Inflator through the internal motor operation to work. When pumping gas, the valve of the connector by the air pressure burst, gas into the pump, and the tire in the air pressure, the valve is closed, the gas into the tire, also used the principle of atmospheric pressure with the car, ball, kayaks inflatable.
  • Car Care Products An Essential Part Of Maintenance

    Oct 10, 2017
    Automobiles are a necessity for modern life, and car supplies have become an essential part of vehicle maintenance. As the Chinese government gradually attaches importance to the automotive supplies industry
  • Tire Puncture Repairs Safety Is More Important

    Oct 10, 2017
    1, check whether the foreign body into the Tire Puncture Repairs The most common damage to the Tire Puncture Repairs is the foreign body. The foreign body that is easy to plunge into the tyre includes nails, screws, wire, glass fragments, stones, tiles, etc.
  • Radiator And Cooling Systerm Protectant Not Susceptible To Corrosion, Long Service Life

    Aug 11, 2017
    Central heating real estate, water pressure is guaranteed, the Radiator and Cooling Systerm Protectant water from the general unrestricted. If the use of wall-mounted boiler heating, water pressure will be relatively small, the water should not be too high, the best choice of 1.5 meters below the height, otherwise the heating effect will be greatly reduced, the Radiator and Cooling Systerm Protectant will cool half of the heat. If the use of coal-fired heating furnace heating, with the matching is the cast iron Radiator and Cooling Systerm Protectant.
  • Emergency Tire Inflator Small Size, No Space

    Aug 11, 2017
    Emergency Tire Inflator are rounded elastomeric rubber products that are grounded on various vehicles or mechanically assembled. Usually installed in the metal rim, can support the body, the impact of external shock, to achieve contact with the road and to ensure the driving performance of vehicles. Tire is often used in complex and harsh conditions, it is driving a variety of deformation, load,Emergency Tire Inflator force and the role of high and low temperature, and tire inflation and these factors are closely related to tire inflation should pay attention to what?
  • Metallic Spray Paint Ensure That The System Is Well Grounded

    Aug 11, 2017
    Metallic Spray Paint process, the powder coating after the flow through the air flow to the gun, the gun through the high-voltage electrostatic generator, in the nozzle of the electrode needle corona discharge, near the electrode produced a dense negative charge, the powder spray from the tip , The charge is charged as a charged powder, in the air, electric field and its own gravity under the action of flying to the ground workpiece, and adsorption on the profile surface. Therefore, in our spraying process, the need to do adequate preventive measures.
  • Auto Cleaner Chemical Properties And The Mechanism Of Cleaning Agents

    Jul 21, 2017
    In recent years, Auto Cleaner equipment in the pharmaceutical industry more and more widely - mainly due to Auto Cleaner equipment can effectively save labor and cleaning time, another key factor is the Auto Cleaner equipment can be very good to repeat the work to ensure that The reproducibility of the cleaning effect. However, the author in a few years on a number of pharmaceutical companies in the consultation work found that part of the pharmaceutical companies on the application of Auto Cleaner equipment or operation of the emergence of the deviation, and even some of the Auto Cleaner equipment manufacturing enterprises in the design phase of the equipment , This article will be a simple analysis of these easy problems in order to expect the relevant pharmaceutical companies and equipment manufacturing enterprises to help.
  • Liquid Tire Sealant Play An Increasingly Important Role

    Jul 21, 2017
    With the development of automobile manufacturing technology and its continuous improvement of performance requirements, Liquid Tire Sealant as a car production is necessary for a class of important auxiliary materials, more and more widely used.
  • Emergency Tire Inflator Easy To Use, High Efficiency

    Jul 21, 2017
    Emergency Tire Inflator are rounded elastomeric rubber products that are grounded on various vehicles or mechanically assembled. Usually installed in the metal rim, can support the body, the impact of external shock, to achieve contact with the road and to ensure the driving performance of vehicles. Tire is often used in complex and harsh conditions, it is driving a variety of deformation, load, force and the role of high and low temperature, and tire inflation and these factors are closely related to tire inflation should pay attention to what?
  • Metallic Spray Paint Compressive Strength And Wear Resistance

    Jul 12, 2017
    Metallic Spray Paint Rapid prototyping is mainly composed of metal spray coating, brush coating and backing material, showing the gradient structure characteristics, in which the brush coating to improve the mold surface hardness (greater than HV500) and wear resistance (increased 3-10 times) , Fiberglass layer and epoxy layer to improve the overall mechanical properties of the mold, high-strength cement backing to reduce the mold manufacturing costs.
  • Metallic Spray Paint Compressive Strength And Wear Resistance

    Jul 12, 2017
    Metallic Spray Paint Rapid prototyping is mainly composed of metal spray coating, brush coating and backing material, showing the gradient structure characteristics, in which the brush coating to improve the mold surface hardness (greater than HV500) and wear resistance (increased 3-10 times) , Fiberglass layer and epoxy layer to improve the overall mechanical properties of the mold, high-strength cement backing to reduce the mold manufacturing costs.
  • Radiator And Cooling Systerm Protectant Improve Thermal Efficiency And Insulation Perfo...

    Jul 12, 2017
    Small Radiator and Cooling Systerm Protectant (or heat sink) is made of aluminum alloy sheet by the stamping process and surface treatment, and large-scale Radiator and Cooling Systerm Protectant extruded from aluminum alloy to form profiles, and then through the mechanical processing and surface treatment made. They are available in a variety of shapes and sizes for different device installations and different power dissipation.
  • Aerosol Paints Preparation Process Is Simple, High Production Efficiency

    Jul 12, 2017
    Aerosol Paintsis the country to promote the development of environmentally friendly paint, but some of the performance is not yet the corresponding solvent-based Aerosol Paintss, affecting its development. Graphene has a unique performance, can improve the performance of water-based paint, and promote its development, to paint workers to bring new expectations.
  • Emergency Tire Inflator Regulate Operational Safety

    Jul 03, 2017
    About the principle of the Emergency Tire Inflator Inflatable pump for any reason caused by pressure drop circuit pressure, booster pump will automatically start to add the leakage pressure to keep the circuit pressure constant. Operational safety: use of gas-driven, no arc and spark, completely used for flammable, explosive liquid or gas sites. Maintenance simple cost-effective: booster pump is a piston pump, the work of the booster pump quickly reciprocating work, with the output pressure increases, the pump slow down until the stop, when the pump pressure constant, the lowest energy consumption, The parts stop moving.
First Prev 12 Next Last 1/2
[[JS_PageFoot]]